How r u all...
Few days back i started tweaking my gpu to make it more power efficient with lesser heat minimizing the performance loss, after a looooott research on several forums i started my work,
at stock my card looks like this-
so, what Asus done was to set the vcore at 1.025 to achieve 925mhz CoreClock, 1880mhz ShaderClock and 2100mhz Memory Clock.
so at stock settings temp looks like this-
at stock benches looks like this-
3d mark Vantage-
so i started undervolting my gpu through MSI afterburner and found the most lowest stable vcore at 1.012v.
here it looks like this-
temps looks like this after 5mins kombuster-
as u can see, at 1.012vcore the temp was more or less same even 1-2c is lott at pick load, but looking at the benches we can say that performance degrades but in small margin but in result my research opens the door to overclock my gpu more at stock(1.025v) vcore and definitely currently my system consumes less power then before.
so tell me guyz what do u think about it, any advice, critisize will be warmly wellcomed..
btw. the Unigine Heaven Benchmark settings was-